This is a listing of the contents of upcoming issues as well as an archive of the past two years. Authors of accepted but not-yet-published work can
find the citation of in-press papers here. The resource can also be used by authors to find relevant work that should be referenced in their own papers. Until a proper search engine is integrated into the site, your browser's "Find" functionality (COMMAND-F on Macs or CTRL-F on PCs) can be used to search titles and authors.
Upcoming | Archive (two years)
Upcoming Articles (not yet assigned)
Please contact the author directly for additional information
Koay, L.K. and Gitano-Briggs, H., Design and Optimization of Mechanically-Resonant Torsional Spring Mechanism for Laser Light Dispersion Applications Ma, W., Wang, D., and Ting, K.L., Characteristic Matrices and Conceptual Design of Hydraulic Systems Shu, L.H., Cheong, H., Stone, R.B., McAdams, D.A., and Chiu, I., Biologically Meaningful Keywords for Functional Terms of the Functional Basis Suh, E.S. and Kott, G., Reconfigurable Parallel Printing System Design for Field Performance and Service Improvement Vos, R. and Barrett, R.M., Post-Buckled Precompressed Techniques In Adaptive Aerostructures: An Overview Wang, N.F. and Tai, K., Design of 2-DOF Compliant Mechanisms to Form Grip-and-Move Manipulators for 2D Workspace Wang, W.S. and Fong, Z.H., Tooth Contact Analysis of Longitudinal Cycloidal-Crowned Helical Gears with Circular Arc Teeth Yin, X., Arendt, P., Chen, W., and Huang, H.Z., A Hierarchical Statistical Sensitivity Analysis Method for Multilevel Systems with Shared Variables Upcoming Articles (assigned)
Archive - The Previous Two Years
Volume 133(9) - September, 2011
Alyaqout, S.F., Peters, D.L., Papalambros, P.Y., and Ulsoy, A.G., Generalized Coupling Management in Complex Engineering Systems Optimization Bravo, R.H. and Flocker, F.W., Optimizing Cam Profiles Using the Particle Swarm Technique Chen, C., Power Flow Analysis of Compound Epicyclic Gear Transmission: Simpson Gear Train Fan, Q., Optimization of Face Cone Element for Spiral Bevel and Hypoid Gears Fuchun, Y., Jutao, Z., Xiaojun, Z., and Hongqing, Z., Axial Thrust Force of Compound Planetary Spur Gear Set Naik, S.V., Saxena, A., Rai, A.K., Reddy, B.V.S.N., How to Choose From a Synthesized Set of Path-Generating Mechanisms Noh, Y., Choi, K.K., Lee, I., Gorsich, D., and Lamb, D., Reliability-Based Design Optimization With Confidence Level for Non-Gaussian Distributions Using Bootstrap Method Peters, D.L., Papalambros, P.Y., and Ulsoy, A.G., Control Proxy Functions for Sequential Design and Control Optimization Radaelli, G., Gallego, J.A., and Herder, J., An Energy Approach to Static Balancing of Systems With Torsion Stiffness Xu, J., Feng, Q., and Wu, W., Geometrical Design and Investigation of a New Profile of the Three Screw Pump Zeanh, A., Dalverny, O., and Bouzourene, A., and Bruzy, C., Structural Reliability Methods Applied to Power Switch Devices: Example of an Aeronautical IGBT Module Zeng, Q., Fang, Y., and Ehmann, K.F., Topological Structural Synthesis of 4-DOF Serial-Parallel Hybrid Mechanisms Volume 133(8) - August, 2011
Aguirre, M.E., Hayes, G.R., Meirom, R.A., Frecker, M.I., Muhlstein, C.L., and Adair, J.H., Optimal Design and Fabrication of Narrow-Gauge Compliant Forceps Blagojevic, M., Marjanovic, N., Djordjevic, Z., Stojanovic, B., and Disic, A., A New Design of a Two-Stage Cycloidal Speed Reducer Bottiglione, F. and Mantriota, G., Reversibility of Power-Split Transmissions Cevallos, J., Gupta, S.K., and Bar-Cohen, A., Incorporating Moldability Considerations During the Design of Polymer Heat Exchangers Chan, J., Fu, K., Schunn, C., Cagan, J., Wood, K., and Kotovsky, K., On the Benefits and Pitfalls of Analogies for Innovative Design: Ideation Performance Based on Analogical Distance, Commonness, and Modality of Examples Chen, G., Gou, Y., and Zhang, A., Synthesis of Compliant Multistable Mechanisms Through Use of a Single Bistable Mechanism Chen, G., Liu, X., and Du, Y., Elliptical-Arc-Fillet Flexure Hinges: Toward a Generalized Model for Commonly Used Flexure Hinges Gollnick, P.S., Magleby, S.P., and Howell, L.L., An Introduction to Multilayer Lamina Emergent Mechanisms Lin, D.S., Ho, C.M., and Chan, K.Y., Beta-Pareto Set Prediction for Bi-Objective Reliability-Based Design Optimization Santer, M. and Pellegrino, S., Concept and Design of a Multistable Plate Structure Shiau, C.S.N. and Michalek, J.J., Global Optimization of Plug-In Hybrid Vehicle Design and Allocation to Minimize Life Cycle Greenhouse Gas Emissions Wang, P.Y., Fan, S.C., and Huang, Z.G., Spiral Bevel Gear Dynamic Contact and Tooth Impact Analysis de Vries, C., Garneau, C.J., Nadadur, G., and Parkinson, M.B., Considering Secular and Demographic Trends in Designing Long Lifetime Products for Target User Populations Volume 133(7) - July, 2011
Bachta, W., Renaud, P., Laroche, E., and Gangloff, J., The Cardiolock Project: Design of an Active Stabilizer for Cardiac Surgery Ganesh, N.J., Maniprakash, S., Chandrasekaran, L., Srinivasan, S.M., and Srinivasa, A.R., Design and Development of a Sun Tracking Mechanism Using the Direct SMA Actuation Hotait, M.A., Kahraman, A., and Nishino, T., An Investigation of Root Stresses of Hypoid Gears with Misalignments Lau, D., Oetomo, D., Halgamuge, S.K., Wrench-Closure Workspace Generation for Cable Driven Parallel Manipulators Using a Hybrid Analytical-Numerical Approach Li, M., An Improved Kriging-Assisted Multi-Objective Genetic Algorithm Liu, Y., Chen, W., Arendt, P., and Huang, H.Z., Toward a Better Understanding of Model Validation Metrics Rossi, C. and Pagano, S., A Study on Possible Motors for Siege Towers Takai, S., Jikar, V.K., and Ragsdell, K.M., An Approach Toward Integrating Top-Down and Bottom-Up Product Concept and Design Selection Walthall, C.J., Devanathan, S., Kisselburgh, L.G., Ramani, K., Hirleman, E.D., and Yang, M.C., Evaluating Wikis as a Communicative Medium for Collaboration Within Colocated and Distributed Engineering Design Teams Wang, P., Hu, C., and Youn, B.D., A Generalized Complementary Intersection Method (GCIM) for System Reliability Analysis Volume 133(6) - June, 2011
Aten, Q.T., Zirbel, S.A., Jensen, B.D., and Howell, L.L., A Numerical Method for Position Analysis of Compliant Mechanisms With More Degrees of Freedom Than Inputs Barents, R., Schenk, M., van Dorsser, W.D., Wisse, B.M., and Herder, J.L., Spring-to-Spring Balancing as Energy-Free Adjustment Method in Gravity Equilibrators Dawei, L. and Tingzhi, R., Study on Deformed Limacon Gear and Motion Optimization of Its Serial Mechanism Hu, W., Li, M., Azarm, S., and Almansoori, A., Multi-Objective Robust Optimization Under Interval Uncertainty Using Online Approximation and Constraint Cuts Kommepalli, H.K.R., Mateti, K., Rahn, C.D., and Tadigadapa, Piezoelectric T-Beam Actuators Landry, L.H. and Cagan, J., Search Strategies in Evolutionary Multi-Agent Systems: The Effect of Cooperation and Reward on Solution Quality Millwater, H. and Feng, Y., Probabilistic Sensitivity Analysis With Respect to Bounds of Truncated Distributions Oster, A. and McCormack, J., A Methodology for Creating Shape Rules During Product Design Pak, N., Dergance, M.J., Emerick, M.T., Gagnon, E.B., and Forest, C.R., An Instrument for Controlled, Automated Production of Micrometer Scale Fused Silica Pipettes Richiedei, D., Trevisani, A., and Zandaro, G., A Constrained Convex Approach to Modal Design Optimization of Vibrating Systems Spaggiari, A. and Dragoni, E., Multiphysics Modeling and Design of Shape Memory Alloy Wave Springs as Linear Actuators Volume 133(5) - May, 2011
Croccolo, D. and Vincenzi, N., On the Design of Interference-Fitted and Adhesively Bonded Joints for Lightweight Structures Dikmen, E., van der Hoogt, P.J.M, de Boer, A., Aarts, R.G.K.M., and Jonker, B., Design of an Experimental Setup for Testing Multiphysical Effects on High Speed Mini Rotors Dong, H., Wang, D., and Ting, K.L., Kinematic Effect of the Compliant Cup in Harmonic Drives Gan, D., Dai, J.S., Caldwell, D.G., Constraint-Based Limb Synthesis and Mobility-Change-Aimed Mechanism Construction Holst, G.L., Teichert, G.H., and Jensen, B.D., Modeling and Experiments of Buckling Modes and Deflection of Fixed-Guided Beams in Compliant Mechanisms Huan, Z. and Jin, Y., Validation and Adjustment of Prior and Data for Bayesian Reliability Analysis in Engineering Design Li, X., Liu, C., Li, W., and Long, T., An Alternative Formulation of Collaborative Optimization Based on Geometric Analysis Pailhès, J., Sallaou, M., Nadeau, J.P., and Fadel, G.M., Energy Based Functional Decomposition in Preliminary Design Rangavajhala, S. and Mahadevan, S., Joint Probability Formulation for Multiobjective Optimization Under Uncertainty Wang, A., Gitnes, S., and El-Bayoumy, L., The Instantaneous Efficiency of Epicyclic Gears in Flight Control Systems Westmoreland, S., Ruocco, A., Schmidt, L., Analysis of Capstone Design Reports: Visual Representations Volume 133(4) - April, 2011
Altuzarra, O., Pinto, C., Sandru, B., and Hernandez, A., Optimal Dimensioning for Parallel Manipulators: Workspace, Dexterity, and Energy Dong, H., Guarneri, P., and Fadel, G., Bi-level Approach to Vehicle Component Layout With Shape Morphing Huang, C.L. and Fong, Z.H., Modified-Roll Profile Correction for a Gear Shaping Cutter Made by the Lengthwise-Reciprocating Grinding Process Lin, P.T., Gea, H.C., and Jaluria, Y., A Modified Reliability Index Approach for Reliability-Based Design Optimization Okwudire, C.E., Improved Screw–Nut Interface Model for High-Performance Ball Screw Drives Saxena, A., An Adaptive Material Mask Overlay Method: Modifications and Investigations on Binary, Well Connected Robust Compliant Continua Sorge, F. and Cammalleri, M., Helical Shift Mechanics of Rubber V-Belt Variators Wang, H., Shan, S., Wang, G.G., and Li, G., Integrating Least Square Support Vector Regression and Mode Pursuing Sampling Optimization for Crashworthiness Design Wang, Z., Azarm, S., and Kannan, P.K., Strategic Design Decisions for Uncertain Market Systems Using an Agent Based Approach Zhan, Z., Fu, Y., Yang, R.J., and Peng, Y., An Enhanced Bayesian Based Model Validation Method for Dynamic Systems Volume 133(3) - March, 2011
Chen, C. and Liang, T.T., Theoretic Study of Efficiency of Two-DOFs of Epicyclic Gear Transmission via Virtual Power Dersjo, T. and Olsson, M., Reliability Based Design Optimization Using a Single Constraint Approximation Point Ferrell, D.B., Isaac, Y.F., Magleby, S.P., and Howell, L.L., Development of Criteria for Lamina Emergent Mechanism Flexures With Specific Application to Metals Figliolini, G. and Angeles, J., Synthesis of the Pitch Cones of N-Lobed Elliptical Bevel Gears Linsey, J., Clauss, E.F., Kurtoglu, T., Murphy, J.T., Wood, K.L., and Markman, A.B., An Experimental Study of Group Idea Generation Techniques: Understanding the Roles of Idea Representation and Viewing Methods Montierth, J.R., Todd, R.H., and Howell, L.L., Analysis of Elliptical Rolling Contact Joints in Compression Shan, S. and Wang, G.G., Turning Black-Box Functions Into White Functions Velex, P., Bruyere, J., and Houser, D.R., Some Analytical Results on Transmission Errors in Narrow-Faced Spur and Helical Gears: Influence of Profile Modifications Wang, Y., Multiscale Uncertainty Quantification Based on a Generalized Hidden Markov Model Yamada, T. and Izui, K., and Nishiwaki, S., A Level Set-Based Topology Optimization Method for Maximizing Thermal Diffusivity in Problems Including Design-Dependent Effects Zhang, J. and Du, X., Time-Dependent Reliability Analysis for Function Generator Mechanisms Volume 133(2) - February, 2011
Alfayad, S., Ouezdou, F., and Namoun, F., New 3-DOF Hybrid Mechanism for Ankle, Wrist of Humanoid Robot: Modeling, Simulation & Experiments Cheong, H., Chiu, I., Shu, L.H., Stone, R.B., and McAdams, D.A., Biologically Meaningful Keywords for Functional Terms of the Functional Basis Chiu, M.C. and Okudan, G., An Integrative Methodology for Product and Supply Chain Design Decisions at the Product Design Stage Landry, L.H. and Cagan, J., Protocol-Based Multi-Agent Systems: Examining the Effect of Diversity, Dynamism, and Cooperation in Heuristic Optimization Approaches Lee, I., Choi, K.K., Noh, Y., Zhao, L., and Gorsich, D., Sampling-Based Stochastic Sensitivity Analysis Using Score Functions for RBDO Problems with Correlated Random Variables Lu, X.J. and Li, H.X., Robust Design for Dynamic System Under Model Uncertainty Marchesse, Y., Changenet, C., Ville, F., and Velex, P., Investigations on CFD Simulations for Predicting Windage Power Losses in Spur Gears Ozalp, N., Toyama, A., Jayakrishna, D., Rowshan, R., and Al-Hamidi, Y., Effect of a Camera-Like Aperture in Quest for Maintaining Quasi-Constant Radiation Inside a Solar Reactor Saunders, M., Seepersad, C., and Holtta-Otto, K., The Characteristics of Innovative, Mechanical Products Yan, H.S. and Lin, J.L., Reconstruction Synthesis of the Calendrical Subsystem of Antikythera Mechanism Zaman, K., McDonald, M., and Mahadevan, S., Probabilistic Framework for Uncertainty Propagation With Both Probabilistic and Interval Variables Zuo, Z.H., Xie, M., and Huang, X., Reinventing the Wheel Volume 133(1) - January, 2011
Dong, H., Ting, K.L., and Wang, D. , Kinematic Fundamentals of Planar Harmonic Drives Hamel, J.M. and Azarm, S., Reducible Uncertain Interval Design by Kriging Metamodel Assisted Multi-Objective Optimization Hamza, K. and Saitou, K., Automated Vehicle Structural Crashworthiness Design via a Crash Mode Matching Algorithm Ho, C.M. and Chan, K.Y., Modified Reduced Gradient With Realization Sorting for Hard Equality Constraints in Reliability-Based Design Optimization Kazemi, M., Wang, G.G., Rahnamayan, S., and Gupta, K., Metamodel-Based Optimization for Problems With Expensive Objective and Constraint Functions Koay, L.K. and Gitano-Briggs, H., Design and Optimization of Mechanically Resonant Torsional Spring Mechanism for Laser Light Dispersion Applications Kolivand, M. and Kahraman, A., A General Approach to Locate Instantaneous Contact Lines of Gears Using Surface of Roll Angle Montestruc, A.N., Influence of Planet Pin Stiffness on Load Sharing in Planetary Gear Drives Okabe, Y., Sugiyama, H., and Inayoshi, T., Lightweight Actuator Structure With SMA Honeycomb Core and CFRP Skins Saxena, A., Are Circular Shaped Masks Adequate in Adaptive Mask Overlay Topology Synthesis Method? Sun, J. and Yao, Y.A., An Active Gear Balancer for Torque Compensation Yildiz, A.R. and Saitou, K., Topology Synthesis of Multicomponent Structural Assemblies in Continuum Domains Zhang, X. and Nelson, C.A., Multiple-Criteria Kinematic Optimization for the Design of Spherical Serial Mechanisms Using Genetic Algorithms Volume 132(12) - December, 2010
Barnum, G.J. and Mattson, C.A., A Computationally Assisted Methodology for Preference-Guided Conceptual Design Frischknecht, B.D., Whitefoot, K., and Papalambros, P.Y., On the Suitability of Econometric Demand Models in Design for Market Systems Hoyle, C., Chen, W., Wang, N., Koppelman, F.S., Integrated Bayesian Hierarchical Choice Modeling to Capture Heterogeneous Consumer Preferences in Engineering Design Messer, M., Panchal, J.H., Krishnamurthy, V., Klein, B., Yoder, P.D., Allen, J.K., and Mistree, F., Model Selection Under Limited Information Using a Value-of-Information-Based Indicator Novellis, L.D. and Carbone, G., Experimental Investigation of Chain Link Forces in Continuously Variable Transmissions Su, H.J. and Tari, H., Realizing Orthogonal Motions With Wire Flexures Connected in Parallel Thakur, N., Keane, A.J., Nair, P.B., and Rao, A.R., Probabilistic Life Assessment of Gas Turbine Blades Thompson, S.C. and Paredis, C.J.J., An Investigation Into the Decision Analysis of Design Process Decisions Vilan, J.A., Robleda, A.S., Lago, M.L., and Ruiz, E.C., Feasible Geometrical Configurations for Split Torque Gearboxes With Idler Pinions Waghmode, L., Sahasrabudhe, A., and Kulkarni, P., Life Cycle Cost Modeling of Pumps Using an Activity Based Costing Methodology Zhang, K., Dai, J.S., and Fang, Y., Topology and Constraint Analysis of Phase Change in the Metamorphic Chain and Its Evolved Mechanism Zhu, L., Jen, T.C., and Kong, X.L., Numerical Investigation of a Silicon Six-Wafer Microcombustor Under the Effect of Heat Loss Through the Outer Walls Volume 132(11) - November, 2010
Calkins, F.T. and Mabe, J.H., Shape Memory Alloy Based Morphing Aerostructures Ding, X. and Yang, Y., Reconfiguration Theory of Mechanism From a Traditional Artifact Foley, D. and Plante, J.S., Design of a Multijet Omnidirectional Propulsion System for Small Jet-Boats Fu, K.F., Cagan, J., and Kotovsky, K., Design Team Convergence: The Influence of Example Solution Quality Hsu, K.S. and Chan, K.Y., A Filter-Based Sample Average SQP for Optimization Problems With Highly Nonlinear Probabilistic Constraints Hutcheson, R.S. and McAdams, D.A., A Hybrid Sensitivity Analysis for Use in Early Design Maier, J.R.A., Troy, T., Johnston, P.J., Bobba, V., and Summers, J.D., Case Study Research Using Senior Design Projects: An Example Application Mutlu, R. and Alıcı, G., A Multistable Linear Actuation Mechanism Based on Artificial Muscles Reneke, J.A., Wiecek, M.M., Fadel, G.M., Samson, S., and Nowak, D., Design Under Uncertainty: Balancing Expected Performance and Risk Schwendeman, J.R., Dreyer, C.B., and Steele, J.P.H., Design Considerations for Development of a Wire-Based Rock Cutting Mechanism for Space Exploration Vedmar, L., A Parametric Analysis of the Gear Surface Roughness After Hobbing Wang, W., Zhang, H., and Yu, W., Design and Realization of Multimobile Robot System With Docking Manipulator Wilson, J.F., Failure of Flawed Utility Poles in Wind Gusts Zhou, H., Topology Optimization of Compliant Mechanisms Using Hybrid Discretization Model Volume 132(10) - October, 2010
Gonzalez-Perez, I., Fuentes, A., and Hayasaka, K., Analytical Determination of Basic Machine-Tool Settings for Generation of Spiral Bevel Gears From Blank Data Lu, S., Schroeder, N.B., Kim, H.M., and Shanghag, U.V., Hybrid Power/Energy Generation Through Multidisciplinary and Multilevel Design Optimization With Complementarity Constraints Malak, R.J. and Paredis, C.J.J., Using Support Vector Machines to Formalize the Valid Input Domain of Predictive Models in Systems Design Problems Nohamad, E.N., Komori, M., Murakami, H., Kubo, A., and Fang, S., Effect of Convex Tooth Flank Form Deviation on the Characteristics of Transmission Error of Gears Considering Elastic Deformation Reid, T.N., Gonzalez, R.D., and Papalambros, P.Y., Quantification of Perceived Environmental Friendliness for Vehicle Silhouette Design Ruderman, A., Choi, S.K., Patel, J., Kumar, A., and Allen, J.K., Simulation-Based Robust Design of Multiscale Products Sen, C., Ameri, F., and Summers, J.D., An Entropic Method for Sequencing Discrete Design Decisions Takai, S., A Use of a Mathematical Model in Updating Concept Selection Xi, Z., Young, B.D., and Hu, C., Random Field Characterization Considering Statistical Dependence for Probability Analysis and Design Zhang, J. and Du, X., A Second-Order Reliability Method With First-Order Efficiency Volume 132(9) - September, 2010
Alfaris, A., Siddiqi, A., Rizk, C., de Weck, O., and Svetinovic, D., Hierarchical Decomposition and Multidomain Formulation for the Design of Complex Sustainable Systems Anand, A. and Wani, M.F., Product Life-Cycle Modeling and Evaluation at the Conceptual Design Stage: A Digraph and Matrix Approach Bohm, M.R., Haapala, K.R., Poppa, K., Stone, R.B., and Tumer, I.Y., Integrating Life Cycle Assessment Into the Conceptual Phase of Design Using a Design Repository Fitzgerald, D.P., Herrmann, J.W., and Schmidt, L.C., A Conceptual Design Tool for Resolving Conflicts Between Product Functionality and Environmental Impact Joyce, T., Okrasinski, T.A., and Schaeffer, W., Estimating the Carbon Footprint of Telecommunications Products: A Heuristic Approach Kishita, Y., Low, B.H., Fukushige, S., Umeda, Y., Suzuki, A., and Kawabe, T., Checklist-Based Assessment Methodology for Sustainable Design Kota, S. and Chakrabarti, A., A Method for Estimating the Degree of Uncertainty With Respect to Life Cycle Assessment During Design Ramani, K., Ramanujan, D., Bernstein, W.Z., Zhao, F., Sutherland, J., Handwerker, C., Choi, J.K., Kim, H., and Thurston, D., Integrated Sustainable Life Cycle Design: A Review Rao, S.S. and Hu, Y., Multi-Objective Optimal Design of Stationary Flat-Plate Solar Collectors Under Probabilistic Uncertainty Shiau, C.S.N., Kaushal, N., Hendrickson, C.T., Peterson, S.B., Whitacre, J.F., and Michalek, J.J., Optimal Plug-In Hybrid Electric Vehicle Design and Allocation for Minimum Life Cycle Cost, Petroleum Consumption, and Greenhouse Gas Emissions Singh, A., Mourelatos, Z.P., and Li, J., Design for Lifecycle Cost Using Time-Dependent Reliability Telenko, C. and Seepersad, C.C., A Methodology for Identifying Environmentally Conscious Guidelines for Product Design Trimble, A.Z., Lang, J.H., Pabon, J., and Slocum, A., A Device for Harvesting Energy From Rotational Vibrations Weiss, L.W., Study of a MEMS-Based Free Piston Expander for Energy Sustainability Yuan, C.Y. and Dornfield, D.A., A Schematic Method for Sustainable Material Selection of Toxic Chemicals in Design and Manufacturing Zhao,Y., Pandey, V., Kim, H., and Thurston, D., Varying Lifecycle Lengths Within a Product Take-Back Portfolio Volume 132(8) - August, 2010
Awtar, S. and Sen, S., A Generalized Constraint Model for Two-Dimensional Beam Flexures: Nonlinear Load-Displacement Formulation Awtar, S. and Sen, S., A Generalized Constraint Model for Two-Dimensional Beam Flexures: Nonlinear Strain Energy Formulation Devanathan, S. and Ramani, K., Creating Polytope Representations of Design Spaces for Visual Exploration Using Consistency Techniques Devanathan, S., Ramanujan, D., Bernstein, W.Z., Zhao, F., and Ramani, K., Integration of Sustainability Into Early Design Through the Function Impact Matrix Hamel, J., Li, M., and Azarm, S., Design Improvement by Sensitivity Analysis Under Interval Uncertainty Using Multi-Objective Optimization Harston, S.P., Mattson, C.A., and Adams, B.L., Capitalizing on Heterogeneity and Anisotropy to Design Desirable Hardware That is Difficult to Reverse Engineer Hegde, S. and Ananthasuresh, G.K., Design of Single-Input-Single-Output Compliant Mechanisms for Practical Applications Using Selection Maps Herrmann, J.W., Progressive Design Processes and Bounded Rational Designers Lin, J., Luo, Z., and Tong, L., Design of Adaptive Cores of Sandwich Structures Using a Compliant Unit Cell Approach and Topology Optimization Saari, D.G., Aggregation and Multilevel Design for Systems: Finding Guidelines Seth, A., Vance, J.M., and Oliver, J.H., Combining Dynamic Modeling with Geometric Constraint Management to Support Low Clearance Virtual Manual Assembly Tari, H. and Su, H.J., Complete Solution to the Eight-Point Path Generation of Slider-Crank Four-Bar Linkages Volume 132(7) - July, 2010
Allison, J.T. and Papalambros, P.Y., Consistency Constraint Allocation in Augmented Lagrangian Coordination Hassan, S.S., Enumeration of Feasible Clutching Sequences of Epicyclic Gear Mechanisms Huang, X. and Zhang, Y., Reliability Sensitivity Analysis for Rack-and-Pinion Steering Linkages Kagotani, M. and Ueda, H., Factors Affecting Transmission Error in Helical Synchronous Belt With Error on Belt Side Face Under Bidirectional Operation Khokhar, Z.O., Vahabzadeh, H., Ziai, A., Wang, G.G., and Menon, C., On the Performance of the PSP Method for Mixed-Variable Multi-Objective Design Optimization Kolivand, M. and Kahraman, A., An Ease-Off Based Method for Loaded Tooth Contact Analysis of Hypoid Gears Having Local and Global Surface Deviations Komori, M., Takeoka, F., Kondo, K., Kondo, Y., Takatsuji, T., Osawa, S., and Kubo, A., Design Method of Double Ball Artifact for Use in Evaluating the Accuracy of a Gear-Measuring Instrument Komori, M., Takeoka, F., Kubo, A., Okamoto, K., Osawa, S., Sato, O., Takatsuji, T., and Kondo, Y., Artifact Design and Measurement Error Analysis in the Evaluation of Lead Measurement Accuracy of Helical Gear Using Wedge Artifact Kwak, M. and Kim, H.M., Evaluating End-of-Life Recovery Profit by a Simultaneous Consideration of Product Design and Recovery Network Design Leishman, R.C. and Chase, K.W., Direct Linearization Method Kinematic Variation Analysis Picheny, V., Ginsbourger, D., Roustant, O., Haftka, R.T., and Kim, N.H., Adaptive Designs of Experiments for Accurate Approximation of a Target Region Todd, B., Jensen, B.D., Schultz, S.M., and Hawkins, A.R., Design and Testing of a Thin-Flexure Bistable Mechanism Suitable for Stamping From Metal Sheets Volume 132(6) - June, 2010
Aguirrebeitia, J., Avilés, R., Fernandez de Bustos, I., and Abasolo, M., Calculation of General Static Load-Carrying Capacity for the Design of Four-Contact-Point Slewing Bearings Huang, Y.C. and Chan, K.Y., A Modified Efficient Global Optimization Algorithm for Maximal Reliability in a Probabilistic Constrained Space Jain, C. and Saxena, A., An Improved Material-Mask Overlay Strategy for Topology Optimization of Structures and Compliant Mechanisms Li, S., Methodical Extensions for Decomposition of Matrix-Based Design Problems Lu, X.J., Li, H.X., and Chen, C.L.P., Variable Sensitivity-Based Deterministic Robust Design for Nonlinear System Myers, O.J., Anjanappa, M., and Freidhoff, C., Designing Piezoelectric Interdigitated Microactuators using Finite Element Analysis Park, J.J. and Song, J.B., A Nonlinear Stiffness Safe Joint Mechanism Design for Human Robot Interaction Redmond, J.A., Brei, D., Luntz, J., Browne, A.L., Johnson, N.L., and Strom, K.A., The Design and Experimental Validation of an Ultrafast Shape Memory Alloy ResetTable (SMART) Latch Spinella, I., Dragoni, E., and Stortiero, F., Modelling, Prototyping, and Testing of Helical Shape Memory Compression Springs With Hollow Cross Section Tsai, M.C., Huang, C.C., and Lin, B.J., Kinematic Analysis of Planetary Gear Systems Using Block Diagrams Yang, D.C.H., Yan, J., and Tong, S.H., Flowrate Formulation of Deviation Function Based Gerotor Pumps Zhao, G., Li, X., and Guan, Y., Multi-Objective Optimization of the Heating Rods Layout for Rapid Electrical Heating Cycle Injection Mold Volume 132(5) - May, 2010
Centeno, G., Morales, F., Perez, F.B., and Benitez, F.G., Continuous Variable Transmission With an Inertia-Regulating System Chen, Y.Z., Hu, Q., and Sun, L.H., Design Criterion for the Space-Curve Meshing Wheel Mechanism Based on Elastic Deformation of the Tines Choi, J.H., An, D., and Won, J., Bayesian Approach for Structural Reliability Analysis and Optimization Using the Kriging Dimension Reduction Method Patel, J. and Campbell, M.I., An Approach To Automate And Optimize Concept Generation Of Sheet Metal Parts By Topological And Parametric Decoupling Schiffmann, J. and Favrat, D., Integrated Design and Optimization of Gas Bearing Supported Rotors Shan, S. and Wang, G.G., Metamodeling for High Dimensional Simulation-Based Design Problems Sreetharan, P.S. and Wood, R.J., Passive Aerodynamic Drag Balancing in a Flapping-Wing Robotic Insect Takai, S., A Game-Theoretic Model Of Collaboration In Engineering Design Tosserams, S., Kokkolaras, M., Etman, L.F.P., and Rooda, J.E., A Nonhierarchical Formulation of Analytical Target Cascading Wang, J., Luo, S., and Wu, Y., A Method for the Preliminary Geometric Design of Gear Tooth Profiles With Small Sliding Coefficients Wang, Z., Huang, H.Z., and Liu, Y., A Unified Framework for Integrated Optimization Under Uncertainty Volume 132(4) - April, 2010
Albers, A. and Ottnad, J., Integrated Structural and Controller Optimization in Dynamic Mechatronic Systems Behdad, S., Kwak, M., Kim, H.M., and Thurston, D.L., Simultaneous Selective Disassembly and End-of-Life Decision Making for Multiple Products That Share Disassembly Operations Chen, W., Yin, X., Lee, S., and Liu, W.K., A Multiscale Design Methodology for Hierarchical Systems with Random Field Uncertainty Desrochers, S., Pasini, D., and Angeles, J., Optimum Design of a Compliant Uniaxial Accelerometer Gabiccini, M., Bracci, A., and Guiggiani, M., Robust Optimization of the Loaded Contact Pattern in Hypoid Gears with Uncertain Misalignments Harston, S.P. and Mattson, C.A., Metrics for Evaluating the Barrier and Time to Reverse Engineer a Product Kawasaki, K. and Tsuji, I., Analytical and Experimental Tooth Contact Pattern of Large-Sized Spiral Bevel Gears in Cyclo-palloid System Lee, U.K., Jang, S.B., and Cheon, S.S., Development of a Subframe Type Fuel Tank for Passenger Cars Linsey, J., Tseng, I., Fu, K., Cagan, J., Wood, K.L., and Schunn, C., A Study of Design Fixation, Its Mitigation and Perception in Engineering Design Faculty Lu, S. and Kim, H.M., A Regularized Inexact Penalty Decomposition Algorithm for Multidisciplinary Design Optimization Problems With Complementarity Constraints Malak, R.J. and Paredis, C.J.J., Using Parameterized Pareto Sets to Model Design Concepts Milenkovic, P.H., Mobility of Single-Loop Kinematic Mechanisms Under Differential Displacement Volume 132(3) - March, 2010
Berselli, G., Modeling and Simulation of an Inertia-Type Infinitely Variable Transmission Han, J. and Papalambros, P.Y., A Note on the Convergence of Analytical Target Cascading With Infinite Norms Jiang, S. and Zheng, S., Dynamic Design of a High-Speed Motorized Spindle-Bearing System Simon, V.V., Advanced Manufacture of Spiral Bevel Gears on CNC Hypoid Generating Machine Tso, P.L., Optimal Design of a Hybrid-Driven Servo Press and Experimental Verification Williams, N.A., Azarm, S., and Kannan, P.K., Multicategory Design of Bundled Products for Retail Channels Under Uncertainty and Competition Wu, C., Liu, X.J., Wang, L., and Wang, J., Optimal Design of Spherical 5R Parallel Manipulators Considering the Motion/Force Transmissibility Volume 132(2) - February, 2010
Arenbeck, H., Missoum, S., Basudhar, A., and Nikravesh, P., Reliability-Based Optimal Design and Tolerancing for Multibody Systems Using Explicit Design Space Decomposition Banerjee, A., Bhattacharya, B., and Mallik, A.K., Optimum Discrete Location of Shape Memory Alloy Wire for Enhanced Actuation of a Compliant Link Bonandrini, G., Mimmi, G., and Rottenbacher, C., Theoretical Analysis of an Original Rotary Machine Carbone, G., de Novellis, L., Commissaris, G., and Steinbuch, M., An Enhanced CMM Model for the Accurate Prediction of Steady-State Performance of CVT Chain Drives Chang, X., Rai, R., and Terpenny, J., Development and Utilization of Ontologies in Design for Manufacturing Han, J. and Papalambros, P.Y., A Sequential Linear Programming Coordination Algorithm for Analytical Target Cascading Kahraman, A., Ligata, H., and Singh, A., Influence of Ring Gear Rim Thickness on Planetary Gear Set Behavior Kragten, G.A. and Herder, J., A Platform for Grasp Performance Assessment in Compliant or Underactuated Hands Nadadur, G. and Parkinson, M.B., Consideration of Demographics and Variance in Regression Approaches to Estimating Body Dimensions for Spatial Analysis of Design Olave, M., Sagartzazu, X., Damian, J., and Serna, A., Design of Four Contact-Point Slewing Bearing With a New Load Distribution Procedure to Account for Structural Stiffness Sensinger, J.W., Unified Approach to Cycloid Drive Profile, Stress, and Efficiency Optimization Summers, J.D. and Shah, J.J., Mechanical Engineering Design Complexity Metrics: Size, Coupling, and Solvability Yao, L., Gu, B., Haung, S., Wei, G., and Dai, J.S., Mathematical Modeling and Simulation of the External and Internal Double Circular-Arc Spiral Bevel Gears for the Nutation Drive
